Original Version

Rule 23.2

23.2    Termination means the end of something or point where it ends, such as where the conductor or underground riser cable ends at the termination apparatus.

A.    Termination Apparatus (normally used in conjunction with non–lead risers) is the equipment or parts of equipment that is used to terminate riser cables. This equipment can be grounded, non–grounded, energized, or non–energized. This equipment and its associated parts include, but is not limited to, stress cones (heat–shrink, cold–shrink, taped, etc.), potheads, various types of terminals and terminal fittings, and various types of bushings.

Strikeout and Underline Version

Rule 23.2

23.2    Termination means the end of something or point where it ends, such as where the conductor or underground riser cable ends at the termination apparatus.

A.    Termination Apparatus (normally used in conjunction with non–lead risers) is the equipment or parts of equipment that is used to terminate riser cables. This equipment can be grounded, non–grounded, energized, or non–energized. This equipment and its associated parts include, but is not limited to, stress cones (heat–shrink, cold–shrink, taped, etc.), potheads, various types of terminals and terminal fittings, and various types of bushings.

22.6    Runs mean vertical or lateral conductors supported in coverings or casings on overhead line structures, or certain insulated communication conductors supported along the surfaces of poles or crossarms.

Final Version

Rule 23.2

23.2    Runs mean vertical or lateral conductors supported in coverings or casings on overhead line structures, or certain insulated communication conductors supported along the surfaces of poles or crossarms.